Views: 2 Author: Publish Time:2026-09-02 09:30:00 Origin: Orpinegift
A custom PVC card holder must fit the credential, protect it and connect reliably to a lanyard, clip or badge reel. Buyers comparing wholesale card holders should specify material, thickness, orientation, opening, attachment slots, branding and packaging before requesting a final quotation.
Provide the finished card width, height, thickness and corner radius. State whether it is an employee ID, access card, event credential, membership card, visitor insert or multi-card set. Confirm whether the card must be removed for scanning, remain visible on both sides or accept a printed paper insert.
Use an actual card sample where possible. Laminates, overlays, embedded chips and stacked cards can change fit. Review Orpinegift's custom card holder options to select a portrait, landscape, open-face or enclosed base style.
| Construction | Typical use | Approval points |
|---|---|---|
| Flexible clear PVC sleeve | Events, inserts and everyday ID display | Film thickness, transparency, welds, opening and cold flexibility |
| Colored-edge PVC holder | Department or event color coding | Color reference, print area, edge consistency and visibility |
| Zip-close PVC pouch | Added protection for cards or small items | Closure cycles, seal, pull tab and internal clearance |
| Rigid plastic holder | Structured protection and frequent scanning | Card retention, release method, surface finish and brittleness |
Material descriptions should include the relevant construction and thickness, not only the word PVC. For projects with restricted-substance, phthalate or other compliance requirements, state the market and required documentation at the quotation stage.
Record outside dimensions, usable pocket dimensions, opening width and slot or hole positions. A portrait holder and a landscape holder may use the same card but require different lanyard behavior and logo placement. Allow enough internal clearance for insertion without making the card loose.
For multi-card or insert holders, define capacity and whether the contents are loaded from the top, side or back. Check that a barcode, QR code, magnetic stripe or contactless area remains accessible as required by the application.
Common features include slot holes, round holes, reinforced eyelets, zipper tracks and snap closures. The holder may connect to a custom lanyard, badge reel, short strap, swivel hook, bulldog clip or split ring. Confirm the complete connection path and the direction in which the card hangs.
Test attachment openings with the production hook or clip. Sharp metal edges, an undersized slot or excessive holder movement can shorten service life even when each individual component looks acceptable.
Screen printing and pad printing suit selected spot-color graphics. UV or digital methods can support more detailed artwork on compatible surfaces. Colored borders, printed inserts and custom backing cards can carry branding without reducing the clear viewing area.
Provide vector artwork, color references, finished logo dimensions and placement. Keep important graphics away from welds, slots and zipper tracks. Approve the print on production material because transparency, surface texture and backing color affect appearance.
Inspection may include dimensions, material thickness, transparency, scratches, contamination, welded seam appearance, opening, card fit, card retention, closure cycles, attachment pull and print adhesion. Define test methods and acceptance criteria according to the application.
Card holders can be packed individually, bundled in counted sets, attached to lanyards or assembled into event kits. Use separators or protective film if clear surfaces scratch during transit. Label cartons by style, color, orientation and quantity.
Provide width, height, thickness and corner radius, plus any overlay or sleeve that remains on the card. An actual sample is the most reliable fit reference.
Yes. Specify the lanyard width, material, attachment, safety breakaway and card orientation so the complete assembly can be tested.
Often yes, subject to material and printing setup. Provide quantity by color and logo version so minimums and pricing can be confirmed accurately.
Request a custom PVC card holder quote with the card sample, dimensions, quantity, artwork, attachment and packaging requirements.
